2004 Chevrolet Silverado Remove Center Consul Replace Left Blend Motor

105,000 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
how to remove the center consul so I can replace the left blend motor
Dec 19, 2012 at 6:57 AM
Advertisement
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
Removal Procedure

1. Remove both front seats. Refer to Seat Replacement Front Bucket in Seats.
2. If equipped with a Bose® amplifier, remove the radio amp fuse located under the hood electrical center. Refer to Electrical Center Identification Views in Wiring Systems.
3. Remove the upper console bezel. Refer to Bezel Replacement Floor Console (Non Luxury Upper), Bezel Replacement Floor Console (Luxury Upper) or Bezel Replacement Floor Console
(Non Luxury Lower).
4. Remove the cupholder. Refer to Cupholder Replacement (Luxury), Cupholder Replacement (Non Luxury), Cupholder Replacement (Rear) or Cupholder Replacement (Pro).
5. Remove the screws (1) retaining the console to the I/P.

Fig. 91: Identifying Bolts Retaining Console To Instrument Panel
Courtesy of GENERAL MOTORS CORP.

6. Disconnect the wire connectors.
7. Remove the console assembly from the vehicle.
8. Remove the rear seat audio control from the console, if equipped. Refer to Audio Control Replacement Rear Seat in Entertainment.
Dec 19, 2012 at 7:04 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle