2004 Chevrolet Monte Carlo Whining

2004 CHEVROLET MONTE CARLO
6 CYL • AUTOMATIC
Avatar
SHEVON410
  • MEMBER
  • 6 POSTS
When I went to start up my car this morning I had a whining noise coming from the engine bay. My power steering fluid was low so I added some. After adding the fluid the car stopped whining while just idling, but it continued to whine while I accelerated or turned the wheel sharp. Can this be because I let the fluid get so low, or could there be a problem with the pump itself?
Nov 15, 2014 at 2:44 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
How low did the fluid get? Are you sure the belt is tight?
Nov 15, 2014 at 5:19 PM
Avatar
SHEVON410
  • MEMBER
  • 6 POSTS
It was pretty low. Like right at the very end of the stick. I didn't think to check the belt, but I can do so in the morning. Will it be pretty obvious if it's loose or not by just looking at it?
Nov 15, 2014 at 6:38 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
you should be able to tell if it is too loose. Not hearing the noise myself makes it hard to know if it is from the pump or the belt.
Nov 17, 2014 at 5:27 AM
Avatar
SHEVON410
  • MEMBER
  • 6 POSTS
The belt was wasn't loose, but the noise has stopped. I guess it did have something to do with fluid getting too low.
Nov 17, 2014 at 8:54 AM
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
If it has stopped, maybe it has bled itself. Let me know if it starts again.
Nov 17, 2014 at 9:14 AM