2004 Chevrolet Aveo rear brake drums

2004 CHEVROLET AVEO
118,000 MILES • 1.6L • 3 CYL • FWD • AUTOMATIC
Avatar
BIG JER
  • MEMBER
  • 1 POST
Taking rear drums off: all in order lugs,tires, nuts on shaft spindle, locking keeper pin on shaft spindle, loosening brake adjustment counter clockwise, taping on drum with rubber mallet turning at the same time the drum slides off? What about the bearing on the shaft spindle inside the drum, do or should I use a wheel puller? Thanks Jerry
Dec 8, 2015 at 11:44 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
once you remove the nut and locking ring and remove it the whole drum assemble comes off the bearings will be in the drum assembly and may be able to be cleaned and repacked. see pic.
Image (Click to enlarge)
Attached Media
Mar 13, 2021 at 10:45 AM
Advertisement