How do you reset change oil light on 04 avalanche?
Nov 25, 2010 at 11:28 PM
change oil light
AUDITMIKE
- MEMBER
- 3 POSTS
Advertisement
Reset procedures:
Turn ignition ON, with engine off.
Fully press and release the accelerator pedal slowly 3 times within five seconds. If the CHANGE ENGINE OIL message flashes, the system is reset.
However, if message stays on, it did not reset. Repeat the procedure.
Turn ignition OFF.
If CHANGE ENGINE OIL message comes back on when engine is started, repeat reset procedure.
OIL CHANGE REMINDER RESET - PROCEDURE 2
Display OIL LIFE REMAINING on DIC.
Press hold the SET/RESET button on DIC or trip odometer stem (if not equipped with DIC) for at more than 5 seconds. The oil life will change to 100%.
Turn the key to OFF. If the light or message comes back on when the engine is started, the oil life system has not reset. Repeat the procedure.
Turn ignition ON, with engine off.
Fully press and release the accelerator pedal slowly 3 times within five seconds. If the CHANGE ENGINE OIL message flashes, the system is reset.
However, if message stays on, it did not reset. Repeat the procedure.
Turn ignition OFF.
If CHANGE ENGINE OIL message comes back on when engine is started, repeat reset procedure.
OIL CHANGE REMINDER RESET - PROCEDURE 2
Display OIL LIFE REMAINING on DIC.
Press hold the SET/RESET button on DIC or trip odometer stem (if not equipped with DIC) for at more than 5 seconds. The oil life will change to 100%.
Turn the key to OFF. If the light or message comes back on when the engine is started, the oil life system has not reset. Repeat the procedure.
Nov 26, 2010 at 12:07 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.