2004 Cadillac Escalade EXT Cruse Control

Tiny
U7616BOB
  • MEMBER
  • 2004 CADILLAC ESCALADE EXT
  • 97,138 MILES
My cruse control has failed. I pressed my resume button after I had to brake and it did not resume. I turned it to the off position and then back on, but nothing did not work. This is the second time it has failed. I did this before and it came back on, but this time nothing happen.
Where do I start researching to resolve this issue?
Wednesday, October 16th, 2013 AT 5:04 AM

6 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check fuse and relay underhood then get it scanned to see what is wrong.
Was this
answer
helpful?
Yes
No
Wednesday, October 16th, 2013 AT 6:53 AM
Tiny
U7616BOB
  • MEMBER
  • 35 POSTS
Thanks for your quick response, The cruse control work sometime. I went to a near by city using the cruse, work fine. Came back, it did not work. All fuses are fine. It could be the relay not engaging. Where is this relay located under the hood? I will check that and let you know.
Was this
answer
helpful?
Yes
No
+1
Wednesday, October 16th, 2013 AT 6:26 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
I screwed up it doesn't have arelay there are 4 fuses for it see pic that is why I asked to get I scanned.
Was this
answer
helpful?
Yes
No
Thursday, October 17th, 2013 AT 6:08 AM
Tiny
U7616BOB
  • MEMBER
  • 35 POSTS
Can you send the pic via my e-mail. Bobfrte40356@yahoo. Com. The pic you sent is too small and I can't see it.

Thanks
Was this
answer
helpful?
Yes
No
Thursday, October 17th, 2013 AT 6:52 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Maybe this is better.
Was this
answer
helpful?
Yes
No
Thursday, October 17th, 2013 AT 6:55 AM
Tiny
U7616BOB
  • MEMBER
  • 35 POSTS
I tried all the things you suggested, but now work. I have scheduled an appointment at Cadillac for a repair.

Thanks for your support
Was this
answer
helpful?
Yes
No
Wednesday, October 23rd, 2013 AT 7:18 AM

Please login or register to post a reply.

Sponsored links