Good morning,
A common issue is the blend door motor at the back heater case.
https://www.2carpros.com/articles/replace-blend-door-motor
I posted the procedure below for the replacement and a picture of the location for you.
Roy
REMOVAL PROCEDURE
1. Remove the right rear quarter trim panel.
2. Disconnect the electrical connector from the auxiliary air temperature actuator.
3. Remove the retaining screws from the auxiliary air temperature actuator.
imageOpen In New TabZoom/Print
4. Remove the auxiliary air temperature actuator (1) from the rear auxiliary HVAC module.
Image (Click to make bigger)
SPONSORED LINKS
Tuesday, November 24th, 2020 AT 8:35 AM