Power steering pump removal

Hello,

Disconnect the battery, remove the belt, remove the high pressure and low pressure lines (one bolts / one clamped) and remove the bolts from the mounting brackets.

Here is a guide that will help you see what you are in for when doing the job.

https://www.2carpros.com/articles/how-to-replace-a-power-steering-pump

Here is a video on how to get the pulley off of the pump

https://youtu.be/MtHG4y_rdMI

Here are diagrams to help you on your car (below)

Please let us know if you need anything else to get the problem fixed.

Cheers

Hello,

Here is a guide to help walk you through the steps and a video to show how to remove and install the power steering pulley. Check out the diagrams below so you can see how to do the job on your car

https://www.2carpros.com/articles/how-to-replace-a-power-steering-pump

and

https://youtu.be/MtHG4y_rdMI

Check out the diagrams (Below). Please let us know what happens.

Nice work, we are here to help, please use 2CarPros anytime.

Did they properly bleed the system?

You will need to look under the vehicle to pinpoint the leak location. It might be easier to clean it off first, then run it a little while before looking for the leak.