I have replaced the alternator and the battery and its still not charging what could be my problem
Jan 27, 2015 at 1:48 PM
Advertisement
JDL
CAR REPAIR CONTRIBUTOR
16,098 POSTS
Here is some wiring for your alternator. Because the pcm has some control over the generator, check for applicable trouble codes. To check codes, yourself, at the least, you need an obd2 code reader. Some of the national brand auto stores will check codes for free, if you can get the vehicle down there.
The serpentine belt ok? Plenty of tension?
Images (Click to enlarge)
Jan 27, 2015 at 3:08 PM
STRAILER
CAR REPAIR CONTRIBUTOR
54,354 POSTS
Hello,
I would check the fusible link to make sure you have a connection. Also if the alternator was not an AC Delco it probably got a defective one.
Here is the alternator wiring diagram you can see the instrument cluster and PCM play a roll in the system as well.
Check out the diagrams (Below)
Let us know what happens and please upload pictures or videos of the problem.
Cheers, Ken
Image (Click to enlarge)
Jan 29, 2018 at 1:30 PM
JCRABB75
MEMBER
1 POST
Thanks you so much it was the a bad alternator as soon as I installed an ACDelco unit it started charging.
thanks for everything I love this site.
Jan 29, 2018 at 1:31 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.