BMW X3 BRAKE SENSOR

2004 BMW X3
95 MILES • AWD • MANUAL
Avatar
LP KOSILLA
  • MEMBER
  • 2 POSTS
HOW DO I CHANGE THE BREAKE FRONT SENSOR ON A 2004 BMW X3 AND IS THERE A RESET PROCEEDURE FOR CLEARING THE INDICATOR LIGHT DISPLAY ON THE DASH
Jan 18, 2011 at 10:42 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
DOCHAGERTY
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 9,603 POSTS
To changer the front sensor, the left front wheel will need to be removed and the sensor is in the caliper area, inserted into the pad, its plug and play, you'll see when the wheel is off. As to the resetting procedure, replace the front and confirm both sensors are intact, turn the key to the run position, but do not start the engine. Wait 1 minute. The lamp should then go out.
Jan 18, 2011 at 11:21 PM
Advertisement