2003 Subaru Outback Taken Crank Pully Off Timing Cams Moved Little Bit Now Even

2003 SUBARU OUTBACK
100,000 MILES
Avatar
NOONGAR
  • MEMBER
  • 2 POSTS
i have taken the crank pully off and the timing cams moved a little bit now i cant even rotate the crank to .t.d.c it just wont move is there a valve or somthing i need to release so i can hand turn the crank my car is a h6 3.0 2003 subaru
Nov 19, 2012 at 5:04 PM
Advertisement
Avatar
KHLOW2008
  • ✓Experienced Mechanic
  • 41,814 POSTS
Have you taken the timing belt off?
Nov 20, 2012 at 6:21 AM
Avatar
NOONGAR
  • MEMBER
  • 2 POSTS
i have the chain off the crank but i should be able to crank it so i can set to T.D.C BUT IT WONT TURN FOR SOME REASON it was ok now just wont turn ?
Nov 20, 2012 at 10:00 AM
Avatar
KHLOW2008
  • ✓Experienced Mechanic
  • 41,814 POSTS
If you have the chain off and the the valve timing are out, you risk damaging the valves if they are fully open.
Reverse the rotation of the crank slightly and see if it moves but never force it too hard nor turn too far

Align the camshaft sprockets and retest.
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Nov 21, 2012 at 10:29 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.