2003 Saturn L300 A/C not charging. Clutch?

Tiny
DSMDDN11
  • MEMBER
  • 2003 SATURN L300
  • 3.0L
  • V6
  • FWD
  • AUTOMATIC
  • 185,000 MILES
I tried to charge my ac system but the compressor clutch wouldn't engage.
Is there a way to manually engage the clutch so I can charge my system?
I know the clutch isn't engaging cause it's not moving along with the pulley and it's not accepting the freon.
Tuesday, May 13th, 2014 AT 4:51 PM

3 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,724 POSTS
You really need to determine what the cause of the problem is stemming from. However, you could run a jumper wire (power supply) from the battery directly to the compressor. That should engage it. If the problem still exists after getting Freon into the system, check fuses, check the cycle switch.
Was this
answer
helpful?
Yes
No
Tuesday, May 13th, 2014 AT 6:56 PM
Tiny
DSMDDN11
  • MEMBER
  • 38 POSTS
Where on the compressor do I attach the jumper wire? Is there any way to attach the jumper wire to the AC relay instead of the compressor since the battery and compressor are on opposite sides of the car.
At the risk of sounding even more ignorant, what's a cycle switch?
Was this
answer
helpful?
Yes
No
Tuesday, May 13th, 2014 AT 11:47 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,724 POSTS
I would run the power directly to the compressor to see if it engages. There should be one wire from the compressor. That is the power supply. As far as the cycle switch, it is what engages and disengages the compressor clutch. If it is bad, the compressor won't engage.
Was this
answer
helpful?
Yes
No
Wednesday, May 14th, 2014 AT 9:15 AM

Please login or register to post a reply.

Sponsored links