2003 Saturn L200

2003 SATURN L200
28,000 MILES • 4 CYL • FWD • AUTOMATIC
Avatar
WHIPPER69
  • MEMBER
  • 3 POSTS
changing centre brake panel lights on a 2003 Saturn L200
Nov 26, 2010 at 12:17 PM
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
Do you mean the high mount stop lamp?
Nov 26, 2010 at 3:59 PM
Avatar
WHIPPER69
  • MEMBER
  • 3 POSTS
yes... the centre stream mounted in the back window, of the six bulbs, I replaced 4 of them and one burnt out and only one remains lit when I brake. The four new ones dont light.
Nov 26, 2010 at 5:15 PM
Advertisement
Avatar
WHIPPER69
  • MEMBER
  • 3 POSTS
Yes, the centre high stream of lights mounted in the back window. I needed to replace four of the six lights. One of the old lamps burnt out, only one remains lit. the four new replacements wont work.
Nov 26, 2010 at 5:19 PM
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
HIGH MOUNTED STOP LAMP REPLACEMENT
Removal Procedure

1. Remove the center high-mounted stop lamp cover by pulling down at the edges.

2. Remove the bulbs, if required.

3. Disconnect the electrical connector from the center high-mounted stop lamp.

4. Remove the center high-mounted stop lamp by pulling down to release the retainer tabs.

Installation Procedure

1. Position the center high-mounted stop lamp to the roof reinforcement.

2. Install the center high-mounted stop lamp by pressing into place until fully seated.

3. Connect the electrical connector to the high-mounted stop lamp.

4. Install new bulbs, if required.

5. Position the cover tabs to the slots.

6. Install the cover pressing into place until fully seated.

© 2008 Mitchell Repair Information Co., LLC.
Nov 27, 2010 at 10:59 AM