Just to add, I did look-up some TSBs. One tsb for intermittent no crank, no start, says to check your battery cables, make sure clean and tight, no cross thread or stripped threads.
The other TSB would have certain codes with that issue. B2960 and/or B3033. Number one, if the codes aren't present the tsb doesn't apply. This issue could cause your security system to act-up. Your ignition switch should have been replaced at least once with P/N 10392423. If it has been replaced, next is your bcm. I'm not telling you to replace anything, if those codes aren't present the tsb doesn't apply.
You need to do some testing and code reading.
Sunday, November 17th, 2013 AT 10:47 AM