Engine cranks, but won't fire?

2003 PONTIAC MONTANA
130,000 MILES
Avatar
EL PRESIDENTE'
  • MEMBER
  • 2 POSTS
When van is driven more than mile b4 turned off, not much problem on restart. But, when it goes short trips(under a mile) it will crank but no fire(acts like it's flooded). Wait about an hour and will it fire right off. Changed fuel filter, it wasn't that bad and did nothing for performance. People have said fuel pump, fuel regulator, coil pack, plugs/wires..etc. I haven't got any error codes. Should I be leaning towards fuel or fire?
Sep 27, 2011 at 8:07 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ✓Experienced Mechanic
  • 110,248 POSTS
When the engine doesn't start, check to make sure it is getting spark and fuel. Chances are one will be missing. Then you will know which ciruit to focus on. Please remember, you may be getting fuel to the rail, but the pressure could be too low. If you have both spark and fuel pressure within the manufacturer's specs, check the injectors to make sure they are getting power.

Sep 27, 2011 at 8:15 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Ask a new question

Frequently Asked Problems for This Vehicle