My breaklights and indicator lights on the front are not working on my 2003 montana. I have checked fuses and bulbs. What else could I check?
Mar 8, 2011 at 6:49 PM
Breaklights
2003 PONTIAC MONTANA
RYAN FEDEWA
- MEMBER
- 2 POSTS
Advertisement
JDL
- ✓ASE Certified Mechanic
- 16,098 POSTS
You don't have brake lites on the front. Did I misunderstand your post?
Mar 8, 2011 at 8:34 PM
i know break lights are on the back. The info I provided said break lights (REAR) AND!! indicator lights(Turn Signals on the front) are not working. I didn't know if the fact that both were not working could help diagnose the problem.
Mar 9, 2011 at 6:00 PM
JDL
- ✓ASE Certified Mechanic
- 16,098 POSTS
Don't mind me, I'm a little dense, sometimes. Does the high-mount brake lite work? If none of the brake lites work. Check the voltage to and from the brake pedal switch.
At the applicable fuses, did you use a voltage tester? As far as front turn signals, brown wire is voltage for park lamps, lite blue wire is voltage for turn signal, black is ground. Check for voltage.
At the applicable fuses, did you use a voltage tester? As far as front turn signals, brown wire is voltage for park lamps, lite blue wire is voltage for turn signal, black is ground. Check for voltage.
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Mar 9, 2011 at 6:20 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.