how to remove and replace headlight assembly,
Feb 10, 2011 at 9:16 PM
remove and replace headlight assembly
2003 PONTIAC GRAND AM
PAPAW33
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
1)Remove the air dam under the hood.
2)Apply light pressure to the front of the headlight assembly and pull the plastic retainers from the headlight (see attached pic)
3) Pull the headlight assembly straight forward to remove it and disconnect the wiring harnesses on the rear.
Install it by reversing the steps I laid out.
2)Apply light pressure to the front of the headlight assembly and pull the plastic retainers from the headlight (see attached pic)
3) Pull the headlight assembly straight forward to remove it and disconnect the wiring harnesses on the rear.
Install it by reversing the steps I laid out.
Image (Click to enlarge)
Apr 23, 2011 at 7:07 AM