Radio getting no power...Any suggestions??

2003 NISSAN 350Z
100 MILES
Avatar
JOSHUAPANCHISIN
  • MEMBER
  • 4 POSTS
2003 350Z...Installing an aftermarket radio and it is not getting any power what so ever...Re-Checked the wiring which is correct and also checked the interior fuse panel radio fuse and it was fine...Any suggestions??
Aug 9, 2012 at 1:04 PM
Advertisement
Avatar
ASEMASTER6371
  • ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
power is key on 12volts. i would re check fuses with a test light to confirm.

Roy
Aug 9, 2012 at 1:10 PM
Avatar
JOSHUAPANCHISIN
  • MEMBER
  • 4 POSTS
How many fuses is there that powers the radio?? I checked the one on the interior fuse panel, but is there one in the fuse panel under the hood??
Aug 9, 2012 at 1:15 PM
Avatar
RASMATAZ
  • ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
Check if the radio unit has a blown fuse-make sure the wiring connector is attached properly
Aug 9, 2012 at 1:15 PM
Avatar
JOSHUAPANCHISIN
  • MEMBER
  • 4 POSTS
I checked the wiring over multiople times and it is done properly, and the fuse on the radio is fine...Is there something under the hood that i should be checking??
Aug 9, 2012 at 1:18 PM
Avatar
RASMATAZ
  • ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
Check fuses below

Aug 9, 2012 at 1:27 PM
Avatar
JOSHUAPANCHISIN
  • MEMBER
  • 4 POSTS
Thanks, i will give it a try
Aug 9, 2012 at 1:37 PM
Avatar
KHLOW2008
  • ASE Certified Mechanic
  • 41,814 POSTS
  • ASE Certified Mechanic
At the radio connector, there must be 2 wires with battery voltage with ignition switch turned on, Light Green and Yellow.

With ignition switch off the Yellow wire should have battery voltage.
Aug 9, 2012 at 1:50 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.