I have a 350z manual and one day my car lost a lot power could it be the clutch

2003 NISSAN 350Z
100,000 MILES
Avatar
NISSAN350Z
  • MEMBER
  • 4 POSTS
My car lost power I get no acceleration in any gear I even put car in any gear and let go of the cluych and it wont shut off
Dec 29, 2011 at 1:18 AM
Advertisement
Avatar
RIVERMIKERAT
  • ASE Certified Mechanic
  • 6,110 POSTS
  • ASE Certified Mechanic
Yep. Clutch problem.
Dec 29, 2011 at 1:19 AM
Avatar
NISSAN350Z
  • MEMBER
  • 4 POSTS
Yea thank you I even been smelling something weird outside probably clutch goin bad
Dec 29, 2011 at 1:21 AM
Avatar
RIVERMIKERAT
  • ASE Certified Mechanic
  • 6,110 POSTS
  • ASE Certified Mechanic
Try adjusting it first, if possible. Then go with replacement.
Dec 29, 2011 at 1:24 AM
Avatar
NISSAN350Z
  • MEMBER
  • 4 POSTS
In order to adjust it how that works
Dec 29, 2011 at 1:27 AM
Avatar
NISSAN350Z
  • MEMBER
  • 4 POSTS
In order to adjust it how that works never done it before
Dec 29, 2011 at 1:28 AM
Avatar
RIVERMIKERAT
  • ASE Certified Mechanic
  • 6,110 POSTS
  • ASE Certified Mechanic
Your clutch is hydraulic, so the only adjustment is the length of the push rod between the slave cylinder and clutch fork. You would need to shorten that rod so that it allows more pressure to be applied to the clutch disc. My guess is that with your description of the problem, you won't be able to adjust enough, though. But, it's worth a try and may give you some time to save for the expense of the repair.
Dec 29, 2011 at 4:10 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.