trying to find a start circuit to use

166,000 MILES
Avatar
PBLAKENEY
  • MEMBER
  • 2 POSTS
I have a 2003 Mitsubishi Eclipse with an automatic transmission V6 GT. I am trying to find a circuit that only has voltage when the key is in the crank or start position. I intend to tie into this circuit to send this voltage to a voltage comparator. The voltage comparator has a large input impedance so there will be nearly zero current consumption. So basically I am searching for an easy to find, easy access circuit that has about 12 volts only when the key is in the start or crank position. Thanks in advance!
Oct 8, 2011 at 8:52 PM
Advertisement
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,988 POSTS
Try at the small terminal at the starter motor solenoid-
Oct 8, 2011 at 9:10 PM
Avatar
KHLOW2008
  • ✓Experienced Mechanic
  • 41,812 POSTS
You should be looking at the crank signal wire and the easiest way is either the ignition switch or if from the engine, the starter relay or the starter solenoid wire.

I am having problem logging onto our database so I am not able to get any wiring diagram now. Will get back to you once I have the info.
Oct 8, 2011 at 9:25 PM
Avatar
KHLOW2008
  • ✓Experienced Mechanic
  • 41,812 POSTS
From the ignition switch, use the Black/Red wire.
Oct 8, 2011 at 9:31 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle

Advertisement