I need to replace the starter on my vehicle but I cant seem to find it

2003 MERCURY MOUNTAINEER
90,000 MILES • 4.6L • V8 • 4WD • AUTOMATIC
Avatar
BEEFCAKE74
  • MEMBER
  • 2 POSTS
I need to replace the starter on my vehicle but I cant seem to find it. Anyone point me in the right directions? Pictures would be appreciated.
Sep 10, 2019 at 12:49 PM
Advertisement
Avatar
DANNY L
  • ASE Certified Mechanic
  • 5,648 POSTS
  • ASE Certified Mechanic
Hello, I'm Danny,

Here is a tutorial showing what is involved on the replacement:

https://www.2carpros.com/articles/how-to-replace-a-starter-motor

I've attached below the pictures you requested.It's located on the left side lower part of the engine block. Hope this helps and thanks for using 2CarPros.

Danny-
Apr 30, 2021 at 9:11 AM
Avatar
BEEFCAKE74
  • MEMBER
  • 2 POSTS
By left side do you mean passenger or driver's side? I'm not sure which way you're looking at the engine. Still having trouble locating the starter on my vehicle.
Apr 30, 2021 at 9:11 AM
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Welcome back:

When he said left, it is the driver's side. If you open the hood you will see where the transmission and engine bolt together. From the front of the vehicle, it will be on the right. The starter will be at engine oil pan level where the engine and transmission come together. It is much easier to see if from under the vehicle.

Also, make sure you disconnect the battery before working on the starter.

Let us know if that helps.

Take care,
Joe
Apr 30, 2021 at 9:11 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.