2003 Mercedes Benz A160 Repair Replace Generic Serial Communication Link On Car

2003 MERCEDES BENZ A160
201,902 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
How do can I repair or replace the generic serial communication link on my car?
I get a diagnostic code - P0600 Generic Serial Communication Link on my car.
The car cranks well but not strting. A new crank sensor has been fitted and new spark plugs plus a new coil pack. hen we discovered that the fuel pump was not pushing enough fuel and we replaced the pump with a new one but still the car is not starting. Can anyone assist for a solution?
Nov 18, 2012 at 7:12 AM
Advertisement
Avatar
MHPAUTOS
  • ✓ASE Certified Mechanic
  • 31,937 POSTS
  • ASE Certified Mechanic
I feel that it is a fault with the ECU, i would suggest that this is tested next, this will have to be done by a specialist electronics tester.
Nov 18, 2012 at 9:18 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.