Fluid transmission

Its on top of the gear box-sorry no pic unable to upload new site is still being upgrade

Drain

Ensure the gearbox is cool. Apply hand brake and securely chock front and rear wheels.
Place a suitable container beneath gearbox.
Clean area around oil filler/level and drain plugs.
Remove oil drain plug, remove and discard sealing washer.
Allow oil to drain.
Fit new sealing washer to oil drain plug.
Fit automatic gearbox drain plug and tighten to 15 Nm (11 lbs. Ft).
Remove oil filler/level plug, remove and discard sealing washer.
Refill

Fill gearbox with recommended oil to bottom of oil level/filler plug hole.
Select 'P' (Park).
Ensure hand brake is applied.
Start engine and allow it to idle.
Apply foot brake.
Move selector lever through all gear positions, while continuing to fill gearbox. Select 'P' (Park).
With engine idling, continue filling gearbox until a 2mm bead of oil runs from oil filler/level plug hole.
Fit new sealing washer to automatic gearbox filler/level plug, fit plug and tighten to 30 Nm (22 lbs. Ft).
Stop engine.
Remove all traces of oil from gearbox casing