Transmission hard down shift.

Tiny
SNORKEDTJ
  • MEMBER
  • 2003 JEEP WRANGLER
  • 105,000 MILES
My 03 jeep has a 4 Spd auto trans. Problem just started yesterday has a hard downshift from 3 to 2. But if I turn overdrive off it doesn't have this issue
Sunday, September 25th, 2011 AT 7:03 PM

10 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Sounds like a valave body issue or accumulator proble. Take it to A trans shop and let them drive it and give you a bid. It does not sound serious but you wont know till someone feels it and checks it out.

Roy
Was this
answer
helpful?
Yes
No
+2
Sunday, September 25th, 2011 AT 7:49 PM
Tiny
SNORKEDTJ
  • MEMBER
  • 2 POSTS
The valve body would it need to be cleaned or what could I do to save me some cash
Was this
answer
helpful?
Yes
No
-1
Sunday, September 25th, 2011 AT 9:42 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Hard to say until you have a guy drive it that does transmissions all day long.

Roy
Was this
answer
helpful?
Yes
No
-1
Sunday, September 25th, 2011 AT 11:59 PM
Tiny
SCOTTYBODY
  • MEMBER
  • 1 POST
What ended up being the solution to your trans downshift problem, I have the exact same problem now with my 2003 wrangler.
I'm hoping its a switch or solenoid pack
Was this
answer
helpful?
Yes
No
+1
Tuesday, May 13th, 2014 AT 6:25 AM
Tiny
JOHNNY HARDY
  • MEMBER
  • 3 POSTS
Same hear, 2003 Jeep Wrangler auto. Transmission doesn’t want to shift into 4th gear unless you feather the accelerator.
Was this
answer
helpful?
Yes
No
Wednesday, July 28th, 2021 AT 9:18 AM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Good afternoon,

Did you start by changing the fluid and filter? That is where I would start.

https://www.2carpros.com/articles/automatic-transmission-problems

https://www.2carpros.com/articles/how-to-service-an-automatic-transmission

Are there any codes set in the system?

Roy
Was this
answer
helpful?
Yes
No
Wednesday, July 28th, 2021 AT 12:23 PM
Tiny
JOHNNY HARDY
  • MEMBER
  • 3 POSTS
No codes and yes I just changed the filter and fluid about 400 miles ago. If you turn off overdrive it won’t do it but at 60 MPH. It’s tackling about 2,300 RPMs.
Was this
answer
helpful?
Yes
No
Wednesday, July 28th, 2021 AT 1:40 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Okay, I would change the fluid and filter again. Make sure there is no metal at the magnet in the pan or in the fluid.

Add some valve body modifier into the fluid when you add the new fluid. Then see if it helps. If it does not then it sounds like a valve body issue with one of the valves sticking.

Roy
Was this
answer
helpful?
Yes
No
+1
Wednesday, July 28th, 2021 AT 1:44 PM
Tiny
JOHNNY HARDY
  • MEMBER
  • 3 POSTS
Okay, thank you very much. I’ll try that and let you know!
Was this
answer
helpful?
Yes
No
Wednesday, July 28th, 2021 AT 1:48 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
You are welcome.

Always glad to help.

Roy
Was this
answer
helpful?
Yes
No
Wednesday, July 28th, 2021 AT 1:50 PM

Please login or register to post a reply.

Sponsored links