2003 Jaguar S Type Change Imt Seals

do you mean the tube seals???

roy

On the write up it says leaking imt seals

It's leaking on the manifold I get the burning oil smell through the vents

the valve cover gaskets contain the seal as the lower end is pressed into the head.
images below

i assume since you provided no engine size it is a v6

Roy

Valve Cover RH
Removal

Remove the intake manifold.
Remove the right-hand on-plug coils.




Detach the right-hand valve coverwiring harness.




Remove the intake manifold rear retaining bracket.




Detach the engine wiring harness retaining bracket.




Remove the valve cover.

Installation




NOTE: Apply a 5mm diameter bead of silicone gasket sealant or equivalent meeting Jaguar specification on the half round gaskets and apply an 8mm diameter on the two places where the cylinder head and front cover join.

To install, reverse the removal procedure.

Install new valve cover gaskets.
Complete the tightening sequence.
Tighten to 10 Nm .

This is not it they are just 2 rings costing $5.00 ea.

I called the dealer they said it's the intake manifold tuning seal