How do I disconnect the clutch from the vehicle

2003 HYUNDAI TIBURON
170,000 MILES
Avatar
SLOVER
  • MEMBER
  • 1 POST
I am currently replacing my blown engine with the exact same one. Both axles have been removed as well as almost everything connected to the engine/car. The final thing I need to do before I start removing the engine is disconnect the clutch(I assume from the pedal?) I am taking out both engine and transmission so I can remove just the sole engine without it being a pain in the...well you know. the transmission is toast, and the clutch I figure I shouldn't tamper with since its only the engine I need. Your help in the matter would be very appreciated, thanks!
Nov 3, 2011 at 3:43 PM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
actually as it'hydraulic just unbolt it from the trans and if it will move out of the way then you are all set. if not you canalways disconnect the line and rebleed the system .
Nov 3, 2011 at 4:46 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.