how to replace fan switch
Mar 21, 2013 at 10:41 AM
2003 Gmc C1500 Replace Fan Switch
ANONYMOUS
- MEMBER
- 1 POST
Removal Procedure
1. Remove the instrument cluster trim plate bezel. Refer to BEZEL REPLACEMENT INSTRUMENT PANEL (I/P)
2. Remove the instrument panel storage tray.
3. Remove the accessory switch assembly from the instrument panel. Refer to ACCESSORY SWITCH REPLACEMEN
4. Remove the screws from the HVAC control assembly.
5. Remove the HVAC control assembly, with the following procedure:
5.1. Release the retaining tabs.
6. Disconnect the electrical connectors from the HVAC control assembly.
note pull bezel first and then if you can get switch out then replace it if not whole module assy has to be replaced. let car run for one minute after install before trying to seeif it works.
1. Remove the instrument cluster trim plate bezel. Refer to BEZEL REPLACEMENT INSTRUMENT PANEL (I/P)
2. Remove the instrument panel storage tray.
3. Remove the accessory switch assembly from the instrument panel. Refer to ACCESSORY SWITCH REPLACEMEN
4. Remove the screws from the HVAC control assembly.
5. Remove the HVAC control assembly, with the following procedure:
5.1. Release the retaining tabs.
6. Disconnect the electrical connectors from the HVAC control assembly.
note pull bezel first and then if you can get switch out then replace it if not whole module assy has to be replaced. let car run for one minute after install before trying to seeif it works.
Images (Click to enlarge)
Mar 22, 2013 at 7:06 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.