2003 Ford Windstar climate control panel not working

2003 FORD WINDSTAR
175,000 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
SJA02360
  • MEMBER
  • 1 POST
I replaced the intake manifold gaskets and Iso lator bolts last weekend. since then, my climate control is not functioning.. could I have missed a vacuum line on reassembly?where would I look for a missing vacuum connection?
Oct 1, 2015 at 11:11 PM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
yes you could have missed or broken a vacuum line. make sure the intake bolts are tight to spec as well as they may have loosened a tad. check the lines in drawing, if you don't find a line off or broken and check all in drawing then re torque intake bolts upper and lower to 10Nm or 89 inch lbs.
Images (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Oct 2, 2015 at 7:06 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.