where is the orfice tube located on a 2003 ford ranger edge
Aug 13, 2011 at 2:40 PM
help finding orfice tube and ac dryer
TERMAINE
- MEMBER
- 4 POSTS
Advertisement
The receiver/dryer is usually a round silver/aluminum-colored device near the passenger side of the bulkhead between engine and passenger compartments. If you follow the outlet of this, you will find the orifice at the bulkhead.
Aug 13, 2011 at 2:48 PM
its the ac dryer the round device the has the inlet for feron. i think its the his side port.
Aug 13, 2011 at 3:22 PM
Are you sure about the info here? I don't see an Edge being produced until 2007
Aug 13, 2011 at 3:58 PM
Oh., You're wondering how to charge the system, then. One will be between the compressor and receiver/dryer (high side) and one will be between the compressor and the condenser(low/suction side). They look like over-sized valve stems for tires.
Wrench, that would explain why I couldn't find it in Mitchell under '03.:)
Wrench, that would explain why I couldn't find it in Mitchell under '03.:)
Aug 13, 2011 at 4:04 PM
I was looking for the location of the tube if it even uses one. Makes it tuff when you're given the wrong info.
Aug 13, 2011 at 4:08 PM
what do u mean bulkhead
Aug 13, 2011 at 4:31 PM
im pretty sure its an ford ranger edge. unless someone just throw a sticker on it. but its difintely a ranger with a v6 3.0 l
Aug 13, 2011 at 4:37 PM
A Ford Edge is an SUV. You have a Ranger.
The orifice tube is in the evaporator inlet and you have an accumulator, not a dryer which is attached to the evaporator.
The orifice tube is in the evaporator inlet and you have an accumulator, not a dryer which is attached to the evaporator.
Aug 13, 2011 at 4:42 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.