2003 Ford Bantam replacing silinder head gasket

2003 FORD BANTAM
156,234 MILES
Avatar
EDDIEJ
  • MEMBER
  • 1 POST
do I have to take of the intake manifold when I take the silinder head of on a ford bantam 1.3ixl, how does the intake manifold come of I have loosen all bolts that I can see but it is still as if something is holding it,and do I have to remove the engine mounting on the belt side.
Oct 9, 2013 at 2:34 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
we don't have tha model in u.s but you can take intake off with head but wouldn't recommend it. check for bolts on bottom side of intake manifold and yes you will have to take themount off by belt. Just make sure to support the engine because it will drop otherwise.
Oct 9, 2013 at 9:34 AM
Advertisement