Advertisement

2003 Dodge Dakota Stuck Middle Replacing Bearing On Inside Front Differential

150,000 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
im stuck in the middle of replacing a BEARING on the INSIDE of the front DIFFERENTIAL on my 2003 4.7L V8 Dakota, i have the CV shaft off, diff cover off, but it appears to get the bearing out i need to remove the 'snub shaft'/'half shaft'. now the CV shaft was retained on the 'snub shaft' by a small c-ring which the CV shaft slid over and 'snapped' into place.. im curious if there is another ring on the inside of the diff to keep the shaft in place, and if so HOW DO I FINISH THIS JOB?!? (PREFERABLY W/O USING A SPECIAL 'SHAFT PULLER' DEVICE)
Dec 11, 2012 at 12:33 PM
Advertisement
Avatar
ASEMASTER6371
  • ✓Experienced Mechanic
  • 52,796 POSTS
attached a parts explosion. yes, there is a c clip in the rear that has to be released.

Roy
Dec 11, 2012 at 5:27 PM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle