my 03 pt cruiser showed a po340 code. i changed the camshaft sensor and now i get a po344 code, could the after market sensor be the problem?
Apr 18, 2011 at 12:36 PM
camshaft sensor
BULLIT 1968
- MEMBER
- 1 POST
Advertisement
Possible, but it's more likely there is a stretched pin in the connector. You'll have to remove a locking wedge to allow the removal of one pin at a time to bend the contact finger. If the terminals are corroded, it's best to splice in a new connector.
If the codes keep returning, you'll need a scanner that can display live sensor data. Wiggle the wiring harness while the engine is running to see if you can find an intermittent break or a place where the signal wire has rubbed through and is grounding out.
If the codes keep returning, you'll need a scanner that can display live sensor data. Wiggle the wiring harness while the engine is running to see if you can find an intermittent break or a place where the signal wire has rubbed through and is grounding out.
Apr 18, 2011 at 1:39 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.