SPONSORED LINKS

Fuel injectors installation

Tiny
HD2424
  • MEMBER
  • 2003 CHEVROLET SILVERADO
  • 5.3L
  • V8
  • 4WD
  • AUTOMATIC
  • 212,000 MILES
Truck listed above is a 1500 Ls. I’m changing the engine harness. I labeled all plugs except fuel injectors. Now I’m not sure which injector plug goto which injector. In Haynes manual for the injectors, they are numbered 1-8. Does those number correspond to the cylinder number? If so, I could use that to correspond wire color on pigtail to correct injector by cylinder number. Would that work?
Or is there a better way? Need help

Thanks in advance.
SPONSORED LINKS
Friday, November 19th, 2021 AT 7:10 AM

3 Replies

Tiny
STEVE W.
  • MECHANIC
  • 13,443 POSTS
The injectors use a single different wire color for each one and the 1-8 is the injector number as you posted. So, if you look at the attached image injector one will have a pink wire (12-volt power feed shared by all injectors) and a solid black wire for its control. So, the plug with those colors' fits injector one. Injector two will have pink and light green with black tracer. Usually if the harness hasn't been unwrapped the plugs will be close to the correct injectors and coils when it is placed on the engine.
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Friday, November 19th, 2021 AT 9:54 AM
Tiny
HD2424
  • MEMBER
  • 191 POSTS
Thanks got it.
Was this
answer
helpful?
Yes
No
Friday, November 19th, 2021 AT 12:01 PM
Tiny
STEVE W.
  • MECHANIC
  • 13,443 POSTS
You're Welcome. Please return if you run into any snags. We'll be here.
Was this
answer
helpful?
Yes
No
Friday, November 19th, 2021 AT 8:28 PM

Please login or register to post a reply.

Related Fuel Injector Replace/Remove Content

Fuel Injector Replacement
GUIDE
Fuel Injector Replacement
Part of the fuel injection system a fuel injector is reasonable for allowing fuel to enter the engine which is controlled by the car's computer. Various sensors provide...
VIEW MORE

Sponsored links