My power steering is not working?

2003 CHEVROLET SILVERADO
V8 • 2WD • AUTOMATIC
Avatar
JNA5804
  • MEMBER
  • 1 POST
i have a 2003 chevy silverado. my power steering is not working. i have checked the fluid level and it is full and i have looked at the steering crank, there is nothing obstructing and mechanically everything seems to be working except for the fact that it is incredibly hard to steer in either direction with the vehicle in reverse, drive and in neutral.. any suggestions?
Jan 29, 2011 at 8:43 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
JACOBANDNICKOLAS
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 110,190 POSTS
It could be a bad rack and pinion or the pump itself is bad. When the rack goes bad, it usually leaks at the end as the result of bad internal bushings. When the bushings go bad, there is excessive resistance when turning. However, I would start with the pump. Have it checked first. It is a cheaper repair and more likely the problem.
Feb 17, 2011 at 6:13 PM
Advertisement
Avatar
STEVE CROUCH
  • MEMBER
  • 1 POST
If your power steering is not working properly on your 2003 Chevy Silverado, even though the fluid level is full and there are no obvious obstructions, there are a few potential causes to consider. Here are some suggestions to troubleshoot the issue:

Power Steering Pump:
Power Steering Fluid Quality:
Power Steering System Leak:
Steering Rack or Gearbox Issues:


Jun 25, 2016 at 5:35 PM