Advertisement
Avatar
DGIGGLES1
  • MEMBER
  • 23 POSTS
Chevy Impala 3.8, has fuel pressure but no spark, replaced the crank shaft sensor, cam sensor and ignition module and still not starting. Not sure where to go from here.
Jan 30, 2012 at 2:19 PM
Advertisement
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,988 POSTS
If the coil/s checked out-have the computer tested-The crankshaft position sensor inputs a signal to the computer and in turn tells the ignition control module to fire the coil/s-Double check the CPS

Do you have power to the coil/s and ignition module?
Jan 30, 2012 at 2:52 PM
Advertisement
Avatar
DGIGGLES1
  • MEMBER
  • 23 POSTS
I have replaced the ignition module and no power to the coils, I have also replaced the cam sensor and cps.
Jan 30, 2012 at 4:50 PM
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,988 POSTS
Check for power at the CPS and CMH sensors
Jan 30, 2012 at 5:03 PM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle