2003 Chevrolet Express Blower motor

Tiny
MAKITA
  • MEMBER
  • 2003 CHEVROLET EXPRESS
  • 120,000 MILES
Blower motor some times does not shut off, even if turned off by key, has drained battery in past, sometimes it does, but I unplug at blower motor to be safe, I've been told it mite be the heater core blower motor resistor, where I unplug it, any input?, I'm not able to pay for I have been operated on 1 1/2 years ago and have little use of right arm And not much I can do right now, they say it will come around but I'm about out of dough, Thanks for understanding.
Wednesday, November 6th, 2013 AT 7:20 AM

7 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
Does this truck have auto temp control?
Was this
answer
helpful?
Yes
No
-1
Wednesday, November 6th, 2013 AT 8:16 AM
Tiny
MAKITA
  • MEMBER
  • 5 POSTS
I don't believe so, just ac/heat control in dash.
Was this
answer
helpful?
Yes
No
Wednesday, November 6th, 2013 AT 2:12 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
So, it DOESN'T have an auto setting where you just select a temp, right?

That would mean that you likely have a bad blower motor resister located next to the blower motor.

https://www.2carpros.com/images/external/104048346.gif
Was this
answer
helpful?
Yes
No
Wednesday, November 6th, 2013 AT 2:34 PM
Tiny
MAKITA
  • MEMBER
  • 5 POSTS
No I don't have a way to select temp, resistor I've been told about, this would work sometimes and not other's, when it stays on its on high and can't be shut off, then all of a sudden it will work normal on any speed and also shut off correctly?
Was this
answer
helpful?
Yes
No
Wednesday, November 6th, 2013 AT 3:35 PM
Tiny
MAKITA
  • MEMBER
  • 5 POSTS
Now that I look at this I have a dial that turns ac/heat on and off it can be on the red for heat and then can be turned to the blue ac, it will control how hot to cool you can make things, u can go strong or light to the heat or strong r light to the ac, , would that be considered an auto control? Thanks
Was this
answer
helpful?
Yes
No
Wednesday, November 6th, 2013 AT 7:32 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
No, that's manual
Was this
answer
helpful?
Yes
No
Thursday, November 7th, 2013 AT 2:21 AM
Tiny
MAKITA
  • MEMBER
  • 5 POSTS
That's seems right, I'll try the resister, Thanks for all your Help, I'll let you know
Was this
answer
helpful?
Yes
No
Thursday, November 7th, 2013 AT 6:53 AM

Please login or register to post a reply.

Sponsored links