2003 Buick Rendezvous Airbag light

DCONNER

MEMBER
2003 BUICK RENDEZVOUS
3.3L
V6
4WD
AUTOMATIC
161,000 MILES

Just replaced the clock spring. Now the horn finally works but the airbag lights stays on still.I am getting a code B1001. What to do to get the light off? I have reset it and it goes off but then it comes back on and stays on

Tuesday, February 10th, 2015 AT 10:07 AM

3 Replies

CARADIODOC

MECHANIC
33,873 POSTS

Was the steering wheel and steering system centered before you installed the new clock spring?

Does the radio work properly and is it the original one? Were any computer modules replaced?

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Tuesday, February 10th, 2015 AT 11:50 AM

DCONNER

MEMBER
2 POSTS

No my radio is locked because my battery went out and I took it out thinking I was going to get a new one but there is so much to do with a new one tried to put it back and now it's locked. Then the airbag light stayed on, with no horn. My husband replace the clock spring I got a horn but the light hasn't went out yet. I am not sure what to do next. So many problems. No radio. And a light that wouldn't go out. The error massage is saying B1001. They tried over and over again toe reset the light but it gives them a massage B1001. Help please

Was this

answer

helpful?

Yes

No

Tuesday, February 10th, 2015 AT 12:25 PM

CARADIODOC

MECHANIC
33,873 POSTS

This is going to require a trip to the dealer. The heart of the problems is the radio. The engineers built the Body Computer into it to prevent people from replacing them with aftermarket radios. All the other dozens of computers are told to "wake up" by the radio when the ignition switch is turned on.

The fault code refers to two computers disagreeing with the programming of the air bag system, so it may be necessary to simply unlock one of them or one may need new software installed. GM has it figured out so most independent shops can't do the programming, so I don't know how serious this will be. I only know they don't do it for free.

Was this

answer

helpful?

Yes

No

+2

Tuesday, February 10th, 2015 AT 12:43 PM