Car will not start, lights all work but the car will not shift aout of geat and it shows to be in drive on the dash.
Jul 12, 2012 at 2:09 PM
How do you replace a natural switch in a 2003 Buick regal?
STEDBOBS
- MEMBER
- 1 POST
Advertisement
PARK/NEUTRAL POSITION SWITCH
1. If a new Park/Neutral Position (PNP) switch has been rotated and the pin is broken or if using an old PNP switch, adjust the PNP switch. Place the shift shaft in the Neutral position.
NOTE: If the PNP switch bolt holes do not align with the mounting boss on the transaxle, verify that the shaft is in the Neutral position.
2. Install the PNP switch to the mounting boss. See Fig. 11 . Assemble the PNP switch mounting bolts loosely.
3. Use the Park/Neutral Switch Alignment Tool (J-41545) to align the flats of the shift shaft to the flats (1 and 2) on the PNP switch. See Fig. 12 .
4. Install the PNP switch mounting bolts. Tighten the PNP switch mounting bolts to specification.
1. If a new Park/Neutral Position (PNP) switch has been rotated and the pin is broken or if using an old PNP switch, adjust the PNP switch. Place the shift shaft in the Neutral position.
NOTE: If the PNP switch bolt holes do not align with the mounting boss on the transaxle, verify that the shaft is in the Neutral position.
2. Install the PNP switch to the mounting boss. See Fig. 11 . Assemble the PNP switch mounting bolts loosely.
3. Use the Park/Neutral Switch Alignment Tool (J-41545) to align the flats of the shift shaft to the flats (1 and 2) on the PNP switch. See Fig. 12 .
4. Install the PNP switch mounting bolts. Tighten the PNP switch mounting bolts to specification.
Images (Click to enlarge)
Jul 12, 2012 at 2:51 PM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.