cam shaft sensor replacement

2003 CHEVROLET ASTRO
225,000 MILES • 4.3L • V6 • 2WD • AUTOMATIC
Avatar
RKUHNS555
  • MEMBER
  • 3 POSTS
I have the distributor off but the rotor has a notch so the cam sensor can come out. How do I rotate the distributor to that point?
May 13, 2019 at 6:01 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Good afternoon,

Do not understand. Did you remove the distributor?

Can you attach a picture of what you are describing?

I attached some pictures. You do not have to move the distributor at all.


Roy
Images (Click to enlarge)
Attached Media
Attached Media
Attached Media
May 13, 2019 at 6:47 PM
Avatar
RKUHNS555
  • MEMBER
  • 3 POSTS
The notch on the left side of the vane wheel needs to be over the sensor or it won’t come out. How do I get that notch where it needs to be to get the sensor out?
Image (Click to enlarge)
Attached Media
May 13, 2019 at 6:51 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Hand rotate the engine around. You do not need to move the distributor. Move the engine instead.

Roy
May 13, 2019 at 6:53 PM
Avatar
RKUHNS555
  • MEMBER
  • 3 POSTS
How would I do that? Sorry I’m not that far advanced.
May 13, 2019 at 6:54 PM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
You would need to put a socket on the nut on the alternator and turn it with a rachet. It is a 15/16 nut.

Roy
May 13, 2019 at 6:59 PM