2002 Toyota Corolla PO300/PO302 codes

2002 TOYOTA COROLLA
Avatar
DAVE1310
  • MEMBER
  • 64 POSTS
I am still trying to diagnose the above codes, and one of the possible issues is a bent valve. This would be a rather expensive fix, but if that's the issue wouldn't the car be idling rough at all times and lack power when driving at all times? The car idles rough for about 1-2 minutes only then seems to run very smooth and no lack of power upon acceleration. I have the same problem with a dead cylinder, would it lack power at all times if this was the case? I am waiting for it to warm up outside so I can stand being outside to perform a compression test. What other possible issues could cause this-I know there are numerous!

Thanks ahead of time for info-VERY helpful website
Mar 30, 2015 at 5:44 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
MHPAUTOS
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 31,937 POSTS
This is a misfire No3 cyl, if it runs smooth at all it will not be a bent valve, you may have a sticking valve or a vacuum leak, do the comp test wet and dry and post the readings for more assistance.
Mar 31, 2015 at 3:58 AM
Advertisement