How to fit fan belt and can you provide me with fan belt diagram?
Aug 12, 2013 at 9:48 AM
Fan belt replacement
2002 SUZUKI VITARA
AFLINGTON2013
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Here is a guide and a link that shows the serpentine belt diagrams:
https://www.2carpros.com/diagrams/suzuki/vitara/2002
and
https://www.2carpros.com/articles/replace-serpentine-belt
Check out the diagrams (below). Please let us know if you need anything else to get the problem fixed.
Cheers
https://www.2carpros.com/diagrams/suzuki/vitara/2002
and
https://www.2carpros.com/articles/replace-serpentine-belt
Check out the diagrams (below). Please let us know if you need anything else to get the problem fixed.
Cheers
Images (Click to enlarge)
Aug 19, 2013 at 10:17 AM
Advertisement
Four cylinder four wheel drive manual.
How do you change the fan belt on a 2000 Suzuki Vitarah 2.0 L? Serpentine belt was a snap but the little fan belt look more difficult with the pulleys and fan shroud/fan in the way.
How do you change the fan belt on a 2000 Suzuki Vitarah 2.0 L? Serpentine belt was a snap but the little fan belt look more difficult with the pulleys and fan shroud/fan in the way.
Jun 29, 2018 at 4:53 PM
(Merged)
Hello,
I am attaching the info for each of the engines. G16, H25, and J20.
You must loosen the slider and pivot bolts to the alternator to remove the belt on the G16 and H25. You may also need to loosen a pulley to allow enough room to get the belt out.
Here are diagrams to help you see what you are in for when doing the job for each engine.
Check out the diagrams (below). Please let us know if you need anything else to get the problem fixed.
Cheers
I am attaching the info for each of the engines. G16, H25, and J20.
You must loosen the slider and pivot bolts to the alternator to remove the belt on the G16 and H25. You may also need to loosen a pulley to allow enough room to get the belt out.
Here are diagrams to help you see what you are in for when doing the job for each engine.
Check out the diagrams (below). Please let us know if you need anything else to get the problem fixed.
Cheers
Images (Click to enlarge)
Jun 29, 2018 at 4:53 PM
(Merged)
How do you change the alternator belt
Mar 31, 2019 at 8:26 AM
(Merged)
Loosen the locking (and adjusting if equipped) bolt on the alternator and tug hard at the alternator to release the tension of the belt for removal.
Mar 31, 2019 at 8:26 AM
(Merged)