When I use the low beam and fog light, the light will sometime be on, then off. Checking the fuse, and relay, everything is OK. Can you tell me why?
Thanks.
Friday, January 16th, 2015 AT 5:16 AM
4 Replies
HMAC300
MECHANIC
48,601 POSTS
Check your multi function switch or a short in the wiring system. Maybe a bad ground is corroded. If you have daytime running lights the module may be interfering with it so have it scanned for codes
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, January 16th, 2015 AT 6:36 AM
XIANGSUOLIU1
MEMBER
5 POSTS
Thanks a lot.
The mufti function switch should be OK for I changed to another one, it still has the same issue. I will check the ground and the wire connection.
Was this
answer
helpful?
Yes
No
Friday, January 16th, 2015 AT 6:43 AM
PERRY003
MEMBER
1 POST
I am having the same issue with my 2002 Subaru, was the ground the issue and if so how would I go about finding the problem?
Thanks
Was this
answer
helpful?
Yes
No
Saturday, March 9th, 2019 AT 2:23 PM
KEN L
MASTER CERTIFIED MECHANIC
48,296 POSTS
When the headlight stops working or flicker use a test light to check the power, grounds and relays. here are guides and the headlight wiring diagrams so you can see how to test and system: