need a saturn expert for this one

2002 SATURN SL2
16,000 MILES
Avatar
JENN7480
  • MEMBER
  • 5 POSTS
I have a 2002 saturn sl2 with about 160k on it. I have no acceleration power to it (goes about 20 tops before the ses light starts flashing). I took it to an auto parts shop to hook up to a computer. it spit out the camshaft position sensor thing (now even I know my car doesn't have one). and the o2 sensor went off too. what I want to know is, is this a simple fix of just changing the plugs and wires or is it something like a fuel pump? the car does a little "shake" while it's in drive while my foot is on the break. Is it worth taking to a shop to tell them to change the plugs/wires or is it better to just junk the dang thing and start over?
Mar 19, 2012 at 2:30 AM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
With the ses light flashing you should have more then a O2 sensor code and cam signal code.A flashing ses light usually means you have a major missfire that can damage the cat.I need the exact code numbers you have not code descriptions.You are correct the car doesnt have a cam sensor when that code happens you usually have black carbon on the spark plug wire end where it goes on the spark plugs.So most likely plugs and wires and if there bad enough it can cause the flashing ses light.Also do not let anyone put platnuim plugs in that engine they carbon foul in that engine.I recomend copper ngk plugs and a good set of wire like ac delco bosch nippon denso etc.The wires and plugs are easy to change you just change one wire at a time so you dont get them mixed up.
Mar 19, 2012 at 2:47 AM
Avatar
JENN7480
  • MEMBER
  • 5 POSTS
the codes are in my car. I can get them tomorrow. it was the exact 340 341 or whatever the code is (440 441?) that was the cam shaft sensor and the o2 sensor. the o2 sensor was secondary to the cam shaft thing. can plugs really do that much for the acceleration? thanks so much in advance. I'll get you the codes soon.
Mar 19, 2012 at 2:51 AM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
The P0440 is a evap code so please get me the exact codes.Also yes bad wires and plugs can cause the engine to run really bad.
Mar 19, 2012 at 2:57 AM
Avatar
JENN7480
  • MEMBER
  • 5 POSTS
let me take a walk to my car and grab them. thanks for the fast replies. I really appreciate them!
Mar 19, 2012 at 3:03 AM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
No problem let me know what codes you have.
Mar 19, 2012 at 3:07 AM
Avatar
JENN7480
  • MEMBER
  • 5 POSTS
codes P0340 and P0341
O2 sensor was possibly a result of the
first 2 so he didn't write the number down.
Mar 19, 2012 at 3:30 AM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Those P340 codes dont usually go hand and hand with O2 sensor codes.Lets check out the plugs and wires and go from there.
Mar 19, 2012 at 3:40 AM
Avatar
JENN7480
  • MEMBER
  • 5 POSTS
thanks! i will keep you posted!
Mar 19, 2012 at 3:46 AM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Alright let me know.
Mar 19, 2012 at 4:03 AM