How do I chec the crank sensor? Thanks
Dec 21, 2012 at 7:18 AM
2002 Saturn Sc1 Chec Crank Sensor Thanks
RIO9760
- MEMBER
- 8 POSTS
With a multi meter it should read about 800 ohms across the sensors terminals with it unplugged. When they test bad they usually read as a open let me know what you find.
Dec 21, 2012 at 9:03 AM
what about the coil how do I test it, also where is the module? Thanks
Dec 22, 2012 at 3:26 PM
Did you check your crank shaft position sensor yet?That's going to be way more likely the module or both coils going bad at the same time.
Dec 22, 2012 at 7:43 PM
Yes checked css it was good 750 ohms replaced it anyway. Next step will be to remove the modual? I will
keep in touch thanks
keep in touch thanks
Dec 25, 2012 at 3:31 AM
Both coils were checked I tested them by reeplacing them one at and checking spark across the top with wires off, no spark coils good reinstalled original coils. Removed modual and installed a good used one. Car startes right up.
Dec 26, 2012 at 10:47 AM
Had a feeling it was the module I have never seen both coils fail at the same time glad to hear you got it fixed.
Dec 26, 2012 at 11:27 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.