2002 Saturn L300 stalls at idle, low idle

2002 SATURN L300
190,000 MILES
Avatar
ESEEBECK
  • MEMBER
  • 2 POSTS
I have a new mass air flow, new heated o2 sensors bank 1 and 2, new coil packs bank 1 and 2. Had exhaust pressure checked for potential cat issues. ecm cleared and driven 200 or so miles. Only code that shows now is P0102 mass air flow input circuit low.

When car idles, it stalls. while idling the lights surge. if that helps or indicates anything.

Any help is appreciated. I don't have a code reader of scan tool so i'm hoping there is some "old school" methods of testing, or you have seen this before and it is a simple fix.

thanks
Oct 12, 2013 at 7:42 PM
Advertisement
Avatar
SATURNTECH9
  • ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
Without a advanced scan tool we will only be guessing what's going on.But I will try to help you the best I can.First make sure the engine control number 1 fuse has power to both sides of the fuse with the key in the run position? Do you have a multi meter to do some testing?
Oct 12, 2013 at 8:47 PM
Avatar
ESEEBECK
  • MEMBER
  • 2 POSTS
i have a multi meter, but am not versed in its use. where are the engine control fuses, in the reg. fuse block under the hood? or is there another fuse area for engine control fuses.

Oct 13, 2013 at 5:30 AM
Avatar
SATURNTECH9
  • ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
Yes in the under hood fuse box should be in there let me know what you find and we will go from there.
Oct 13, 2013 at 1:34 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.