OBD Code P0172 2002 Villager

2002 MERCURY VILLAGER
55,000 MILES
Avatar
KENBJ91
  • MEMBER
  • 5 POSTS
runs good cold as it warms up it runs rough and sometimes stalls at stop lights.
Dec 23, 2011 at 6:50 PM
Advertisement
Avatar
FIXITMR
  • ASE Certified Mechanic
  • 9,990 POSTS
  • ASE Certified Mechanic
could be oxygen sensor issue.
Dec 23, 2011 at 7:01 PM
Avatar
FIXITMR
  • ASE Certified Mechanic
  • 9,990 POSTS
  • ASE Certified Mechanic
also get MAF sensor cleaned.
Dec 23, 2011 at 7:04 PM
Avatar
KENBJ91
  • MEMBER
  • 5 POSTS
MAF sensor has been cleaned twice
have not checked O2 sensor
Dec 23, 2011 at 7:21 PM
Avatar
KENBJ91
  • MEMBER
  • 5 POSTS
can you check o2 sensor on the car?

thanks ken
Dec 23, 2011 at 8:17 PM
Avatar
FIXITMR
  • ASE Certified Mechanic
  • 9,990 POSTS
  • ASE Certified Mechanic
with the right equipment you can.
Dec 24, 2011 at 5:07 AM
Avatar
KENBJ91
  • MEMBER
  • 5 POSTS
fixitmr;

guess i'll have replace the 02 sensor I'll let you know what the out come is.

thank you much Ken
Dec 24, 2011 at 2:36 PM
Avatar
MHPAUTOS
  • ASE Certified Mechanic
  • 31,937 POSTS
  • ASE Certified Mechanic
ensure no exhaust leaks up stream of the O2 sensor and that the plug gaps are correct, often a tune problem can trigger this code.
Dec 25, 2011 at 8:15 AM
Avatar
KENBJ91
  • MEMBER
  • 5 POSTS
exhaust is stainless is ok. did not know that a bad tune up could cause this problem. just had a tuneup about 100 miles ago. but it was running rough before the tuneup.and stalling. thanks for the info. Ken
Dec 25, 2011 at 3:56 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.