#3,4 pistons not getting spark.

2002 MERCURY COUGAR
117,000 MILES • 6 CYL • FWD • MANUAL
Avatar
PJSUPERCAT
  • MEMBER
  • 4 POSTS
#3, #4 pistons not getting a spark. i have replaced spark plugs, wires, coil, imrc cable assembly, and have nothing. please help.
Dec 27, 2010 at 10:37 PM
Advertisement
Avatar
RASMATAZ
  • Experienced Mechanic
  • 75,992 POSTS
Inspect and test the crankshaft position sensor-on lower front of engine
Dec 27, 2010 at 10:54 PM
Avatar
PJSUPERCAT
  • MEMBER
  • 4 POSTS
i have been troubleshooting wires from the coil to the PCM. pin 3 (brown solid green stripe) read to pin 52 on PCM connector good for ohms. i was told it may be time to change out the pcm. does this sound like it is going on the right track?
Dec 27, 2010 at 11:56 PM
Avatar
RASMATAZ
  • Experienced Mechanic
  • 75,992 POSTS
The CPS tells the computer which cylinders to fire-
Dec 27, 2010 at 11:58 PM
Avatar
PJSUPERCAT
  • MEMBER
  • 4 POSTS
ok i will go with that next. the how exactly do i test and inspect the crankshaft position sensor? detailed instructions and an ipb would be mostly appreciated.
Dec 28, 2010 at 12:14 AM
Avatar
PJSUPERCAT
  • MEMBER
  • 4 POSTS
i found out where the ckp is so now i have to wait for autozone to open up. hopefully this is it man, it would do me a great deal of saved time and money. especially money! about 40 bucks vice 500+ for the pcm. going with the ckp first, thank you rasmataz.
Dec 28, 2010 at 1:21 AM
Avatar
RASMATAZ
  • Experienced Mechanic
  • 75,992 POSTS
You're welcome and TY for using 2carpros
Jan 9, 2011 at 8:03 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.