2002 lincoln navigator alternator

2002 LINCOLN NAVIGATOR
V8 • 4WD • AUTOMATIC
Avatar
SCOTTYDG45
  • MEMBER
  • 2 POSTS
Last week, by all appearances my alternator seemed bad, i.e., would not charge battery, and the vehicle would eventually lose all power. I replaced the alternator with a remanufactured from a discount auto store, and the vehicle ran for two days, and then the same thing happened. I took the alternator back had it tested, and it tested good. However, I am told that in some Lincoln's if you do not replace the alternator with the OEM's alternator, that it may not work. I need to know how true this is as I have replaced the battery, checked all grounds, and even did the dealer trick with the light bulb looking for excessive draw on the battery by pulling fuses. HELP!!!
Aug 1, 2011 at 8:09 PM
Advertisement
Avatar
DOCFIXIT
  • ASE Certified Mechanic
  • 18,828 POSTS
  • ASE Certified Mechanic
Check fuse 11 in engine junction box. does Charge light up with key on? what is BATT voltage at 1500rpms?
Aug 1, 2011 at 8:14 PM
Avatar
SCOTTYDG45
  • MEMBER
  • 2 POSTS
I cannot check battery voltages at 1500 rpms due to the vehicle will die as soon as you take off the battery cables after jumping the motor. I have checked all fuses, but will look again. I do not have a wiring diagram, please tell me how to know which fuse is 11. They are not marked. thanks
Aug 1, 2011 at 8:41 PM
Avatar
DOCFIXIT
  • ASE Certified Mechanic
  • 18,828 POSTS
  • ASE Certified Mechanic
What is Batt voltage engine off? see diagram
Aug 1, 2011 at 8:52 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.