cooling fan

2002 LINCOLN LS
148,900 MILES • V8 • 2WD • AUTOMATIC
Avatar
HOGMANMIKE
  • MEMBER
  • 16 POSTS
how to replace radiator fan on a lincoln ls
Mar 6, 2011 at 11:44 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
The easiest thing to do is to remove the shroud then the cooling fan assembly. Once it is out, then you can access the motor much easier.
May 3, 2011 at 1:23 PM
Avatar
HOGMANMIKE
  • MEMBER
  • 16 POSTS
This is how i did it, works fairly well, too bad it didn't fix the problem
May 4, 2011 at 1:08 AM
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Can you tell me what is happening?
May 4, 2011 at 3:04 AM
Avatar
HOGMANMIKE
  • MEMBER
  • 16 POSTS
cooling fan does turn but, very slowly and does not speed up any with a/c switched on,I did replace the fan motor with a brand new Ford part. it only gets hot when standing still, like a traffic jam or just idling, does ok on the road ( air is forced thru the radiator)
May 4, 2011 at 3:11 AM
Avatar
HOGMANMIKE
  • MEMBER
  • 16 POSTS
I also borrowed a tester ( Snap-on scanner) and ran the Ford "star test" on the car, got no codes, and it said "fan speeds" good with KOER test. Fan did not speed up
May 4, 2011 at 3:14 AM
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
Have you checked for excessive resistance in the wiring to the blower motor? Ground?
May 4, 2011 at 12:09 PM
Avatar
HOGMANMIKE
  • MEMBER
  • 16 POSTS
how could this have any affect on the cooling fan?
May 5, 2011 at 12:31 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.