How do you replace the EGR valve on a Isuzu Axiom 2002?
Mar 5, 2011 at 4:24 PM
EGR valve
2002 ISUZU AXIOM
CLB
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Its pretty straight forward here you go.
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the electrical connector at the EGR valve.
3. Remove the bolts from the common chamber.
4. Remove the EGR valve from the common chamber manifold.
5. Remove the gasket from the common chamber manifold.
Installation Procedure
1. Install the gasket on the common chamber.
2. Install the EGR valve on the common chamber.
3. Secure the EGR valve and the gasket with the bolts.
Torque: 25 N-m (18 lb ft)
NOTE: It is possible to install the EGR valve rotated 180 from the correct position. Make sure that the base of the valve is placed so that it aligns with the mounting flange.
4. Connect the electrical connector at the EGR valve.
5. Connect the negative battery cable.
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the electrical connector at the EGR valve.
3. Remove the bolts from the common chamber.
4. Remove the EGR valve from the common chamber manifold.
5. Remove the gasket from the common chamber manifold.
Installation Procedure
1. Install the gasket on the common chamber.
2. Install the EGR valve on the common chamber.
3. Secure the EGR valve and the gasket with the bolts.
Torque: 25 N-m (18 lb ft)
NOTE: It is possible to install the EGR valve rotated 180 from the correct position. Make sure that the base of the valve is placed so that it aligns with the mounting flange.
4. Connect the electrical connector at the EGR valve.
5. Connect the negative battery cable.
Mar 5, 2011 at 5:01 PM
Advertisement