2002 GMC Yukon code p0300

2002 GMC YUKON
185,000 MILES • 6.0L • V8 • 4WD • AUTOMATIC
Avatar
D107
  • MEMBER
  • 1 POST
I've replaced mas air flow, egr valve, fuel filter, injectors, plugs and plug wires, crank shift sensor. Fuel pressure is running around 50psi have good spark. But still throwing a code p0300. What else could it be?
Jun 17, 2014 at 9:18 PM
Advertisement
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
these are very hard to diagnose even for a pro best to have them do it if your vin is "Z" then it shold be 48-54 psi all others 55-62 so if it's not a vin z sounds like fulepump doesn't have enough pressure. although it could be something like a compression problem valve train problem.
Jun 17, 2014 at 11:12 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.